by Jose Marcano | Jul 6, 2025 | Gen 3 Repairs
The original bellows pump is the black and blue component mounted to a bracket on the left back wall of the unit. This has now been replaced with a new-style pump that is red and black and has a different coupling geometry on top. Please note that the...
by Jose Marcano | Jan 19, 2023 | iMistAway
* iMist3 is designed to be installed directly on a MistAway System and connect to a cellular tower. It does not connect to a home’s internet network. Note: If you are replacing an iMist1 with an iMist3, please follow these instructions about disconnecting and...
by Jose Marcano | Jan 19, 2023 | iMistAway
Understanding How the Module Connects to Mobile Networks Once the misting unit and iMist3 module have power, the green LED on the module will begin flashing. This LED has 2 different modes that correlate with a state of connection: Fast flashing = Searching The iMist3...
by Jose Marcano | May 17, 2022 | Nozzle Circuit
Small nozzle circuits containing less than 20 nozzles will often cause erroneous errors to appear on a Gen 1.3 System. The root cause of the issue is the flowmeter (“Gen 1.3 Leak Detection Kit”) used to check for possible nozzle circuit leaks by measuring the output...
by Jose Marcano | Mar 22, 2022 | Parts & Assemblies
Pump Fittings: Agitation Valve Fittings: Misting System Internal Fittings: Additional Fittings:
