by Homer Jon Young | Dec 31, 1969 | Gen 1.3 – Setup, Gen 3 – Setup, Nozzle Circuit
WARNING! AIR TRAPPED IN THE FILTER DUE TO IMPROPER INSTALLATION AND SYSTEM STARTUP COULD CAUSE VIOLENT RUPTURE OF THE FILTER HOUSING RESULTING IN SEVERE PERSONAL INJURY! FOLLOW INSTRUCTIONS CAREFULLY. Do not remove Pressure Relief Valve Assembly Before...
by Homer Jon Young | Dec 31, 1969 | Gen 1.3 - Routine Service, Gen 3 - Routine Service, Nozzle Circuit
WARNING! AIR TRAPPED IN THE FILTER DUE TO IMPROPER INSTALLATION AND SYSTEM STARTUP COULD CAUSE VIOLENT RUPTURE OF THE FILTER HOUSING RESULTING IN SEVERE PERSONAL INJURY! FOLLOW INSTRUCTIONS CAREFULLY. Before installing filter or replacing element, ensure...
by Homer Jon Young | Dec 31, 1969 | Gen 1.3 - Routine Service, Gen 3 - Routine Service, Nozzle Circuit
Clogged nozzles significantly reduce the flow rate/volume of mist and result in loss of system effectiveness. Usually the problem is that the filters inside the nozzles tips are fouled, although in some cases the orifice of the nozzle is clogged by scale from hard...
