by Homer Jon Young | Nov 13, 2018 | Parts & Assemblies, Specs, Safety & Warranty
Note: Electronic Control parts for all legacy units are no longer available. Gen 1 / EFA Series Resources: Gen 1 / EFA Series Operating Manual Gen 1.2 Resources: Gen 1.2 Operating Manual Gen II Resources: Gen II Operating...
by Homer Jon Young | Dec 31, 1969 | Gen 1.3 – Setup
-1. Pick a Suitable Location On firm level surface with good access for service. Free from flooding or sprinklers. Near GFCI outlet. Unit’s power cord is 12 ft. NEVER USE AN EXTENSION CORD! Unit requires 120V and 15 amp circuit. Test with multi-meter. ...
by Homer Jon Young | Dec 31, 1969 | Gen 3 – Setup
-1. Pick a Suitable Location On firm level surface with good access for service. Free from flooding or sprinklers. Close to water faucet dedicated to the unit. 25 ft of 3/8″ tubing included with unit. Faucet must be able to deliver 1 gal/min. Near GFCI...
by Homer Jon Young | Dec 31, 1969 | Gen 3 - Troubleshooting
Cause: Unit has calculated zero remaining volume in the bottle and must be refilled. See Gen 3: Refill Checklist
