by Homer Jon Young | Dec 31, 1969 | Gen 3 – Setup
Leak Detection enables the Gen 3 to detect a leak in the nozzle circuit. To function properly, the leak TOLerance should be calibrated to reflect the number of nozzles on the nozzle circuit. To configure Leak Detection TOLerance for Nozzle Count DATA Menu, TOL. Press...
by Homer Jon Young | Dec 31, 1969 | Gen 1.3 - Troubleshooting
This post will detail the definition of an ERR3, as well as the common and potential causes of the solution. It will also delve into simple troubleshooting methods that can be used to diagnose and treat the issue. What is ERR3? ERR3 is displayed when the...
by Homer Jon Young | Dec 31, 1969 | Gen 1.3 – Setup
Leak Detection is an option – usually factory installed: Enables Gen 1.3 to detect a leak in the nozzle circuit and suspend misting. Enables Gen 1.3 to accurately report the level of remaining solution in the drum See Gen 1.3: Level Display Required to enable...
by Homer Jon Young | Dec 31, 1969 | Gen 3 - Troubleshooting
What is ERR3? ERR3 is displayed when the batch tank fill volume is significantly greater than expected. Most Common Cause: leak in the nozzle circuit. Other Potential Causes: System Setup does not reflect installed system – 1) more nozzles installed than...
