by Jim Jackson | Mar 22, 2022 | Parts & Assemblies
Pump Fittings: Agitation Valve Fittings: Misting System Internal Fittings: ...
by Jim Jackson | Jan 25, 2022 | Gen 1.3 - Troubleshooting
Symptoms: Visible Leak Portion(s) of nozzle circuit not misting adequately Drum’s actual fluid level runs empty before the controller’s volume gauge Troubleshooting Tests: 1. Visually Inspect Nozzle Circuit To Find Leak Run an inspection mist cycle by...
by Jim Jackson | Jan 25, 2022 | Gen 1.3 - Troubleshooting
This can be the root cause of an error 3 if the nozzle circuit is installed at a higher than normal (12 feet or above) height above the misting unit. An excess amount of fluid from the nozzle circuit lines can drain back into the misting unit during the post-mist hold...
by Jim Jackson | Jan 25, 2022 | Gen 1.3 - Troubleshooting, Gen 3 - Troubleshooting
Symptoms: Error 3 on controller/High AFR in Data menu Visible Leak Portion(s) of nozzle circuit not misting adequately Insecticide’s fluid level runs empty faster than expected Record Info and Run Troubleshooting Tests: 1. Before running ANY mist cycle, record...
by Jim Jackson | Jun 30, 2020 | Controller & Remote, iMistAway
1. Confirm the controller firmware version. Cycle power to the misting unit and observe controller startup display. The fourth item displayed will be the current version of firmware on the controller. For any Gen 1.3 or Gen 3 to be compatible with iMist2, the...
