by Homer Jon Young | Dec 31, 1969 | Gen 1.3 – Setup
Pictured: Gen 1.3 Zone Kit on mounting bracket. Disconnect Power to the Unit. The zone kit will be recognized when the controller boots up after the Zone Kit is connected. 2. Secure the zone kit mounting bracket to the chassis using the bolt at the front right...
by Homer Jon Young | Dec 31, 1969 | Gen 1.3 – Setup, Gen 3 – Setup
Content coming soon! Establish Optional Wind Sensor SET-UP Menu, SEN If sensor installed, ON. Otherwise, set to OFF. Set Max Wind Speed (wind sensor required) SET-UP Menu, WND Set max wind speed Verify ALT value is...
by Homer Jon Young | Dec 31, 1969 | Gen 1.3 – Setup
See Gen 1.3: Setup Checklist Watch Setting Up a Gen 1.3 Drum Unit (12:19) See Controller: “Learning” the iMist2-ready Handheld Remote Transmitter See Gen 1.3: Approved Insecticides See Gen 1.3 – Troubleshooting See Important Safety Instructions...
