Unit not misting automatically

Potential Causes:  

• System Mode is set to OFF or REM (or ON) and should be set to AUTO EVERYDAY or AUTO-CUSTOM. See Controller:  Setting System Mode
• There are no AUTO MIST cycles defined. See Controller:  Setting AUTO MIST Cycles
• The controller has calculated that the unit is empty and needs to be refilled.
  • See Gen 1.3:  Controller displays EMP and unit will not mist
  • See Gen 3:  Controller displays EMP CAR and unit will not mist
• Unit has suspended operating for some reason.  See Controller displays NOZ00, SKIP, ERR# or SUS and unit will not mist
• The unit is plugged into the outlet but the display is blank.
  • See Gen 1.3: Blank Controller Display
  • See Gen 3: Blank Controller Display